Back To Frank's Boat Page
From Fall 1999

Fiberglassing the bottom with epoxy

Foredeck Reinforcements. I added this at the last minute so I could mount a heavy duty cleat on the bow. The curve should also help prevent water pooling on the foredeck

Hatch mortises

Most of the hull complete

I added seats to Jim's original design. They lock in place, but can be lifted out when they are not needed. I made these out of redwood

leeboard

On it's side before painting.

First coat of primer. I used my neighbor's air sprayer to do the first coat. Next time, I'll just hand paint it - the spray is too messy when you are working inside the boat.



Back to Frank's Boat Page